標準及適用范圍
本產品按GB/T 14049-2008標準和企業標準Q/ZJGG 01-2017標準進行生產,適用于額定電壓U(U,)為10 (12)kV、20 (24 ) kV的架空電力線路用銅芯、鋁芯交聯聚乙烯絕緣或高密度聚乙烯絕緣架空電纜。
適用特性
①電纜導體長期允許的最高工作溫度(有承載結構電纜) :
高密度聚乙烯絕緣: 75℃,
交聯聚乙烯絕緣: 90℃。
②短路時(持續時間不超過5秒)導體最高溫度不應超過:
高密度聚乙烯絕緣: 150℃,
交聯聚乙烯絕緣: 250℃。
③電纜的敷設溫度不應低于-20℃。
④電纜的允許彎曲半徑不小于電纜彎曲試驗時所用圓柱體直徑。
Standard and Application Scope
This product is manufactured based on the GB/T standard 14049-2008 and Q/ZJGG 01-2007. The copper or aluminum conductor with XLPE or HDPE insulated cable can be applied to the power supply system that the rated voltage is 10(12)kV or 20(24)kV.
Using Features
①The long-term maximum operating temperature of the conductor (cable
with supporting structure) is:
HDPE insulated cable: 75℃,
XLPE insulated cable: 90℃.
②When short circuit (the lasting time should not more than 5 seconds), the
maximum temperature of the conductor is:
HDPE insulated cable: 150℃ ,
XLPE insulated cable: 250℃.
③The minimum ambient temperature in laying is -20℃.
④The permitted bending radius of the cable should not be less than the diameter of cylinder that had been used in the bending test.
電纜的規格Specification of the Cable